A4500 VA5 Pro
The Latest & Fastest 4-Channel Vibration Analyzer
Explore the most powerful Vibration Analyzer on the market.
Use multitasking tool in order to analyse your machinery.
Balancer, Thermal imaging camera, Ultrasound, Bump test, ODS, MCSA – you name it…
Measure 4 vibration signals and 4 process values (temperature, pressure etc.) along with speed synchronously. Triaxial sensor friendly, proximity probes for displacement measurement, ultrasound microphone, acoustic microphone, thermal imaging camera, current clamp meter, stethoscope and more.
Built-in Modules
- Analyzer
- Route
- Run Up
- Recorder
- Balancer
- FASIT (Expert System)
- Stethoscope
- Lubri
- Octave Analysis
- Bump Test
- ADS (Operating Deflection Shapes)
- Ultrasound
- Camera
- Picture Gallery
- IR Camera
Comparison of Acquisition Time – Adash and Conventional Analyser
Technical Specifications
- Input channels:
- 4 x AC, ICP® power supply on/off
4 x DC for process values
1 x TACHO for speed probe/external trigger
- Input range:
- AC +/- 12 V peak-peak
DC +/- 24V
- AD conversion:
- 24 bit, 64 bit internal signal processing
No AutoGain function!
- Dynamic range S/N:
- 120 dB
- Frequency ranges:
- Maximum range: 1 Hz – 90 kHz (1 Ch, 194 kHz sampling)
Maximum range: 1 Hz – 25 kHz (4 Ch, 64 kHz sampling)
Minimum range: 1 Hz – 25 Hz (4 Ch, 64 Hz sampling)
- Sampling mode:
- Fully simultaneous for 4 channels
- FFT resolution:
- Min. 100 lines
Max. 3 276 800 lines
- Unit modes:
- Data collector – route measurements
Balancer – 1 and 2 plane on site balancing
Run up – run up and coast down measurements
Recorder – raw signal recording for later post analysis
Stethoscope – listening of the bearing/machine noise
FASIT – expert system for automatic fault detection
Octave analyzer – audible sound measurements
Bump test – measurement of natural frequencies
ADS – Animated Deflection Shapes (Operating deflection shapes)
Ultrasound – measurement of ultrasound in 30 – 50 kHz range
Camera – 5MP, 2592×1944 px resolution
IR Camera – 384×288 px resolution; NETD sensitivity 50mK
Gallery – Storage for picture, IR image, screenshots
- Display:
- Colour 1125 x 800 pixels, LCD
- Processor:
- Intel Atom 1.9 GHz
- Memory, Route:
- 64 GB, max. 16 GB for one route, number of routes is limited by free
memory only
- Data processing:
- Real time FFT
DEMOD – ENVELOPE analysis
ACMT – low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
- Raw signal recorder:
- 64 kHz sampling frequency
4 Ch memory consumption 3 GB/hour
4 Ch total recording – 20 hours
- Trigger:
- Manual, External, Signal level, Time
Use for signal recording trigger
Speed change, Time interval
- Interface:
- USB 3.0, 2.0 compatible
- Operating temperature range:
- -10˚C to +50˚C
- Power:
- Battery 8 hours of operation, AC 100-230 V
- Case:
- Aluminium heavy duty
- Size & Weight:
- 295 x 230 x 49 mm, 2000 g
Data Sheet & Manual
